Raid Lab

In this lab you’ll follow the excellent guide by DigitalOcean to create all of the common RAID types supported by Linux. DigitalOcean is a cloud services provider that will sell you Linux VMs by the hour. They specialize in Linux and have lots of guides.

The Guide

Read over the guide at this link:

The guide has the following sections:

  1. Resetting RAID Devices (do this between steps)

  2. Creating a RAID 0 Array

  3. Creating a RAID 1 Array

  4. Creating a RAID 5 Array

  5. Creating a RAID 6 Array

  6. Creating a RAID 10 Array

Use sections 2 through 6 to create each of the RAID types. Between sections save the output of the mdadm --detail command for the RAID number:

$ sudo mdadm --detail /dev/md0 > /vagrant/mdadm_raidN.txt 

NOTE: Replace the N in the command with the RAID number

Turn In

When you’re done you should have the following files:

  • mdadm_raid0.txt

  • mdadm_raid1.txt

  • mdadm_raid5.txt

  • mdadm_raid6.txt

  • mdadm_raid10.txt

Turn in your files on Canvas.