Partitioning with GNU parted

In this lab you’ll use the standard VM to partition extra disks. You should start with a fresh VM, instead of the one you used last week. To remove and re-provision your VM run the commands:

$ vagrant destroy
$ vagrant up

Step 1: Partition a Disk With GPT

Start parted on /dev/sdc:

$ sudo parted /dev/sdc 

Follow the class walkthrough do to the following:

  • Create a GPT disk label

  • Make a partition with the following attributes:

    • Name: data1

    • Type: ext4

    • Start: 1MB

    • End: 1024MB

Step 2: Format /dev/sdc1

Format the disk with the mkfs command:

$ sudo mkfs -t ext4 -L data1 /dev/sdc1 

Verify the format:

$ sudo dumpe2fs /dev/sdc1 

Step 3: Mount /dev/sdc1

Mount the new disk on /mnt

$ sudo mount /dev/sdc1 /mnt 

Verify that it is mounted:

$ df /dev/sdc1 
Filesystem     1K-blocks  Used Available Use% Mounted on
/dev/sdc1         967320  1224    899744   1% /mnt

Step 4: Make the Mount Permanent

Add the following line to /etc/fstab

LABEL=data1 /mnt ext4 defaults 0 0 

Reboot your VM and verify that the data partition is mounted.

Turn In

Run the following command to create files to turn in:

$ mount > /vagrant/partition-lab-mount.txt

Turn in:

  • partition-lab-mount.txt

Submit your files on Canvas.