Lab: Format and Mount a Disk

This lab will take you through formatting and mounting a disk in your Vagrant VM.

Step 1: Format the /dev/sdc

A disk needs to be formatted before it can be mounted. Use this command to format /dev/sdc with the ext4 filesystem.

$ sudo mkfs -t ext4 /dev/sdc 

Step 2: Inspect the Format

The dumpe2fs command prints information about ext filesystems. Use it to display information about /dev/sdc

$ sudo dumpe2fs /dev/sdc 

Answer the following questions:

  1. What is the UUID of the filesytem?
  2. How many free blocks does the filesystem have?
  3. What are the lifetime writes to the fillesystem?

Submit your answers in a file called format_and_mount.txt.

Step 3: Mount the Filesystem

Make a directory where you can mount the filesystem.

$ sudo mkdir -p /data/sdc

Now mount your filesystem onto that directory:

$ sudo mount /dev/sdc /data/sdc

What is in the /data/sdc directory?

Step 4: Remember the Mount

If you reboot your VM the mount will be forgotten. If you want Linux to ensure your disk is mounted on the next reboot add the following line to /etc/fstab.

/dev/sdc /data/sdc ext4 defaults 0 0 

Test your fstab entry using the mount command. First unmount /data/sdc:

$ sudo umount /data/sdc 

Now verify that you can mount it with the one-argument mount command:

$ sudo mount /data/sdc 
NOTE: If mount has an error fix /etc/fstab before you reboot.

Step 5: Check Your Work

Reboot your VM and check if the filesystem is still mounted using df.

$ df
Filesystem     1K-blocks     Used Available Use% Mounted on
udev              498880        0    498880   0% /dev
tmpfs             101580     3124     98456   4% /run
/dev/sda1       10098468   902784   9179300   9% /
tmpfs             507880        0    507880   0% /dev/shm
tmpfs               5120        0      5120   0% /run/lock
tmpfs             507880        0    507880   0% /sys/fs/cgroup
/dev/sdc          999320     1284    929224   1% /data/sdc
vagrant        489445384 80077756 409367628  17% /vagrant
tmpfs             101580        0    101580   0% /run/user/1000
You should see /dev/sdc listed.

Use blkid to check for your filesytem:

$ sudo blkid
/dev/sda1: LABEL="cloudimg-rootfs" UUID="6c93f311-22e6-4c56-835f-64f7e6ecf75f" TYPE="ext4" PARTUUID="b9390537-01"
/dev/sdc: UUID="af4274c2-23c4-4261-ab04-e2cae193c95d" TYPE="ext4"
/dev/sdb: UUID="2019-02-04-14-26-04-00" LABEL="cidata" TYPE="iso9660"

Save the output of blkid to submit with this lab.

$ sudo blkid > /home/vagrant/blkid.txt

Submit

Please submit the following:

  • Answers to the lab questions in a file called format_and_mount.txt
  • A copy of your /etc/fstab
  • The output of blkid in a file called blkid.txt